|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TOTAL POWER INT'L 100W Single Output with PFC Function Features : Universal AC input / full range SP-100 series Built-in active PFC function, PF>0.93 Protections:Short circuit/Over load/Over voltage Built-in constant current limiting circuit Remote ON-OFF control(Optional) LED indicator for power on 100% full load burn-in test Fixed switching frequency at PFC:67KHz PWM:134KHz 3 years warranty SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT SP-100-3.3 3.3V 20A 0 ~ 20A 66W SP-100-5 5V 20A 0 ~ 20A 100W SP-100-7.5 7.5V 13.5A 0 ~ 13.5A 101.25W 100mVp-p SP-100-12 12V 8.5A 0 ~ 8.5A 102W 100mVp-p SP-100-13.5 SP-100-15 13.5V 7.5A 0 ~ 7.5A 101.25W 100mVp-p 15V 6.7A 0 ~ 6.7A 100.5W 100mVp-p SP-100-24 24V 4.2A 0 ~ 4.2A 100.8W 150mVp-p SP-100-27 27V 3.8A 0 ~ 3.8A 102.6W 150mVp-p SP-100-48 48V 2.1A 0 ~ 2.1A 100.8W 250mVp-p 100mVp-p RIPPLE & NOISE (max.) Note.2 100mVp-p VOLTAGE ADJ. RANGE 3.14 ~ 3.63V 4.75 ~ 5.5V 2.0% VOLTAGE TOLERANCE Note.3 2.0% LINE REGULATION LOAD REGULATION SETUP, RISE, HOLD TIME VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR 0.5% 1.0% 85 ~ 264VAC 47~63Hz PF>0.93/230VAC 70% 76% 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 0.5% 1.0% 0.5% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 600ms, 30ms, 20ms at full load 120 ~ 370VDC PF>0.98/115VAC at full load 78% 80% 80% 82% 84% 83% 82% INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT OVER LOAD 1.7A/115VAC 0.8A/230VAC COLD START 40A/230VAC <2mA / 240VAC 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.63 ~ 4.46V 5.5 ~ 6.75V 8.25 ~ 10.13V 13.2 ~ 16.2V 14.85 ~ 18.23V 16.5 ~ 20.25V 26.4 ~ 32.4V 29.7 ~ 36.45V 52.8 ~ 64.8V PROTECTION OVER VOLTAGE FUNCTION Protection type : Shut down o/p voltage, re-power on to recover REMOTE CONTROL(OPTION) CN1:4 ~ 10VDC POWER ON, <0 ~ 0.8VDC POWER OFF -10 ~ +60 (Refer to output load derating curve) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.05%/ (0 ~ 50 VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL1950, TUV EN60950 Approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMC (Note 4) HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 211.3K hrs min. MIL-HDBK-217F (25 179*99*45mm (L*W*H) 0.6Kg; 20pcs/12Kg/1.17CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. TOTAL POWER INT'L 100W Single Output with PFC Function Mechanical Specification 179 SP-100 Case No. 915A series Unit:mm 20 25 117 123 25 60 65 R.C. +V ADJ. CN1 1 2 LED 7 6 5 2-M4 L=5mm 51 9.5 4 3 2 1 8 5-M3 L=3mm 49.5 38 15 142 25 16 25 25 3 .5 3-M4 L=6mm Terminal pin number assignment : Pin No. 1 2 3 Assignment AC/L AC/N FG Pin No. 4,5 6,7 Assignment DC OUTPUT -V DC OUTPUT +V Remote ON/OFF(CN1):JST S2B-XH or equivalent(optional) Pin No. 1 2 Assignment RC+ RCMating Housing JST XHP or equivalent Terminal JST SXH-001T-P0.6 or equivalent Derating Curve Output Derating VS Input Voltage Ta=25 100 SP-100-12~48 SP-100-3.3~7.5 (With 18CFM FAN) 100 90 80 80 60 LOAD (%) SP-100-3.3 SP-100-5 SP-100-7.5 70 LOAD (%) 40 60 50 40 20 -10 -10 0 0 10 10 20 20 40 45 50 55 55 60 60 (HORIZONTAL) 70 (VERTICAL) 85 100 115 12.5 135 45 10 155 119 79 99 230 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz |
Price & Availability of SP-100-75 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |